LNMP(CentOS+Nginx+Mysql+PHP)服务器环境配置
一、简介
Nginx是俄罗斯人编写的十分轻量级的HTTP服务器,它的发音为 “engine X”, 是一个高性能的HTTP和反向代理服务器,同时也是一个IMAP/POP3/SMTP 代理服务器.Nginx是由俄罗斯人 Igor Sysoev为俄罗斯访问量第二的 Rambler.ru站点开发的,它已经在该站点运行超过三年了。Igor Sysoev在建立的项目时,使用基于BSD许可。
在高并发连接的情况下,Nginx是Apache服务器不错的替代品。Nginx同时也可以作为7层负载均衡服务器来使用。Nginx 0.8.46 + PHP 5.2.14 (FastCGI) 可以承受3万以上的并发连接数,相当于同等环境下Apache的10倍。
Nginx 超越 Apache 的高性能和稳定性,使得国内使用 Nginx 作为 Web 服务器的网站也越来越多,其中包括新浪博客、新浪播客、网易新闻、腾讯网、搜狐博客等门户网站频道,以及六间房、56.com等视频分享网站,Discuz!官方论坛、水木社区等知名论坛,盛大在线、金山逍遥网等网络游戏网站,豆瓣、人人网、YUPOO相册、金山爱词霸、迅雷在线等新兴Web 2.0网站。
为什么Nginx的性能要比Apache高得多?
这得益于Nginx使用了最新的epoll(Linux 2.6内核)和kqueue(freebsd)网络I/O模型,而Apache则使用的是传统的select模型。
目前Linux下能够承受高并发访问的 Squid、Memcached都采用的是epoll网络I/O模型。而处理大量的连接的读写,Apache所采用的select网络I/O模型非常低效。
下面用一个比喻来解析Apache采用的select模型和Nginx采用的epoll模型进行之间的区别:
假设你在大学读书,住的宿舍楼有很多间房间,你的朋友要来找你。
select 版: 宿管大妈就会带着你的朋友挨个房间去找,直到找到你为止。
epoll 版: 宿管大妈会先记下每位同学的房间号,你的朋友来时,只需告诉你的朋友你住在哪个房间即可,不用亲自带着你的朋友满大楼找人。
如果来了10000个人,都要找自己住这栋楼的同学时,select版和epoll版宿管大妈,谁的效率更高,不言自明。同理,在高并发服务器中,轮询I/O是最耗时间的操作之 一,select和epoll的性能谁的性能更高,同样十分明了。
Nginx 的官方中文维基:http://wiki.nginx.org/NginxChs (推荐)
二、系统环境
系统平台:RHEL 5.4(系统要求:Linux 2.6+ 内核)
[root@mimvp ~]# uname -a
Linux mimvp 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Nginx 版本:nginx/1.7.9
MySQL 版本:MariaDB-server.x86_64 10.0.15-1.el6 (或 MySQL Community Server 5.6.22)
PHP 版本:PHP 5.5.9
三、安装准备
1、获取相关安装包
CentOS、Redhat等Linux发行版可直接利用CentOS的RPM包安装,如有关联包,安装时一起安装。
注:先安装如下关联包,否则下面的安装会提示错误
sudo yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers unzip subversion
2、RPM包搜索网站
http://code.google.com/p/zed-lnmp/
3、nginx软件包准备
Nginx所需要的软件包可以从下面位置获取,也可以记住名字在google中搜索。
以下最新版本截止 2018.07.24
httpd-2.4.34.tar.gz 官方下载地址 (2018-07-16)
nginx-1.14.0.tar.gz 官方下载地址 (2018-04-17)
php-7.2.8.tar.gz 官方下载地址 (2018-07-19)
php-5.2.17-fpm-0.5.11.diff.gz 官方下载地址,官方主页 (2011-01-11)
mysql-8.0.11.tar.gz 官方下载地址 (2018-04-19)
MariaDB 10.3.8 官方下载地址 (2018-07-19)
PDO_MYSQL-1.0.2.tgz 官方下载地址(2006-05-01)
MySQL-python-1.2.4b4.tar.gz 官方下载地址(2012-10-08)
MySQL-python-1.2.5.zip 官网下载地址 (2014-01-02)
libiconv-1.15.tar.gz 官方下载地址 (2017-02-02)
libmcrypt-2.5.8.tar.gz 官方下载地址,官网主页(2007-02-19)
mcrypt-2.6.8.tar.gz 官方下载地址,官网主页(2008-11-22)
memcached-1.5.9.tar.gz 官方下载地址 (2018-07-07)
memcache-3.0.8.tgz 官方下载地址 (2013-04-07)
memcached-3.0.4.tgz 官方下载地址 (2017-11-21)
php-memcached-3.0.4.tar.gz github下载地址 (2017-11-21)
libmemcached-1.0.18.tar.gz 官方下载地址 (2014-02-09)
mhash-0.9.9.9.tar.gz 官方下载地址 (2008-12-08)
pcre-8.42 官方下载地址,官方主页 (2018-03-20)
pcre2-10.31 官方下载地址,官方主页 (2018-02-12)
eaccelerator-0.9.5.3.tar.bz2 官方下载地址,github源码 (2012-06-25)
ImageMagick-7.0.8-8.tar.gz 官方下载地址,官方主页 (2018-07-24)
imagick-3.4.3.tgz 官方下载地址 (2017-02-01)
mongodb-src-r4.0.0.tar.gz 官方下载地址 (2018-06-21)
redis-4.0.10.tar.gz 官方下载地址 (2018-06-13)
redis-4.1.0.tgz 官方下载地址 (2018-07-10)
phpredis-4.1.0.tar.gz github下载地址 (2018-07-10)
四、安装 PHP(FastCGI模式)
编译安装PHP所需的支持库:
1. 安装 libiconv
对文本进行编码间的转换,用它来处理中文各种编码之间的转换。
#tar zxvf libiconv-1.14.tar.gz
#cd libiconv-1.14/
#./configure --prefix=/usr/local
#make
#make install
cd ../
2. 安装libmcrypt 实现加密功能的库
# tar zxvf libmcrypt-2.5.7.tar.gz
# cd libmcrypt-2.5.7/
# ./configure
# make
# make install
# /sbin/ldconfig
# 注:这里不要退出去了。
# cd libltdl/
# ./configure --enable-ltdl-install
# make
# make install
若安装失败,请详见米扑博客:PHP 对称加密AES算法 (强烈推荐)
3. 安装mhash (哈稀函数库)
# tar zxvf mhash-0.9.9.9.tar.gz
# cd mhash-0.9.9.9/
# ./configure
# make
# make install
# cd ../
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.7 /usr/lib/libmcrypt.so.4.4.7
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
4. 安装mcrypt
# tar zxvf mcrypt-2.6.8.tar.gz
# cd mcrypt-2.6.8/
# /sbin/ldconfig
#./configure
# make
# make install
# cd ../
如果安装过程中,抛出“configure: error: *** libmcrypt was not found”错误,这是因为环境变量的问题,gcc编译的时候根据自身定义的变量寻找相关函数库等文件,libmcrypt也是刚安装的,在变量中没有定义出来,所以手动添加环境变量使其生效:
[root@mimvp-bj mcrypt-2.6.8]# export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
然后 #./configure 过后,继续 # make && make install , 成功!
若安装失败,请详见米扑博客:PHP 对称加密AES算法 (强烈推荐)
注:DG库所需要安装包,可以采用rpm包来安装,减少时间,由于php已经集成GD库,但前提支持包应事先安装,如zlib,png,jpeg,freetype等。如果完全想采用tar包安装的话,请参考lamp相关内容。
安装MongoDB
CentOS 安装 MongoDB:
Install MongoDB on CentOS ( 官方 )
CentOS 7 vim /etc/yum.repos.d/mongodb-org.repo
[mongodb-org-3.2] name=MongoDB Repository baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/3.2/x86_64/ gpgcheck=1 enabled=1 gpgkey=https://www.mongodb.org/static/pgp/server-3.2.asc
安装命令:
sudo yum install -y mongodb-org
五、编译安装MySQL(安装时间较长)
方式1: CentOS 安装配置MariaDB
MariaDB 官方安装教程:MariaDB 10.2 CentOS repository list
CentOS 7 vim /etc/yum.repos.d/MariaDB.repo
[mariadb] name = MariaDB baseurl = http://yum.mariadb.org/10.2/centos7-amd64 gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB gpgcheck=1
安装命令:
# yum remove MariaDB-server MariaDB-client
yum -y install MariaDB-client MariaDB-server MariaDB-devel
方式2: MySQL 源码安装
建立mysql组,建立mysql用户并且加入到mysql组中
# groupadd mysql
# useradd mysql -g mysql
[root@linux lnmp]# tar zxvf mysql-5.1.35.tar.gz
[root@linux lnmp]# cd mysql-5.1.35
# ./configure --prefix=/usr/local/mysql
--without-debug
--with-extra-charsets=gbk
--with-extra-charsets=all
--enable-assembler
--with-pthread
--enable-thread-safe-client
--with-mysqld-ldflags=-all-static /*不带共享库的形式编译mysqld*/
--with-client-ldflags=-all-static
--with-big-tables
--with-readline /*要采用rpm方式安装ncurses或tar包安装*/
--with-ssl /*要采用rpm方式安装openssl*/
--with-embedded-server
--enable-local-infile
--with-plugins=innobase
# make && make install
# /usr/local/mysql/bin/mysql_install_db --user=mysql
#以mysql身份初始化数据库
# cp ./support-files/mysql.server /etc/init.d/mysql
#复制Mysql启动服务至系统
# cp ./support-files/my-medium.cnf /etc/my.cnf
# chmod 755 /etc/init.d/mysql
# cd /usr/local/mysql/ #切换到cd /usr/local/mysql/目录下
# chown -R mysql . #改变当前目录下的所有者为mysql用户
# chown -R mysql var #修改数据库目录的权限
# chgrp -R mysql . #改变当前目录下的mysql用户的文件为mysql组
# /usr/local/mysql/bin/mysqld_safe --user=mysql&
# /usr/local/mysql/bin/mysqladmin -u root password 'admin' #设置管理员密码
[root@linux html]# /usr/local/mysql/bin/mysql -u root -p #测试密码输入
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 5
Server version: 5.1.35-log Source distribution
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> \q /*退出mysql*/
# chkconfig --add mysql #添加mysqld服务到系统
# chkconfig mysql on #打开myslqd服务
# service mysql start #启动Mysql
#/usr/local/mysql/bin/mysqladmin shutdown #关闭数据库
#查看mysql端口的打开情况
# netstat -tunlp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/P name
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 2936/
#查看是否启动:
#ps -ef | grep mysql
注:在配置过程中,整体的配置思路从上往下,其中的一些功能可以用在实际的配置过程中,主要用于测试环节中。
Mysql的优化部分这里没有给出,需要参考其它资料。
六、编译安装PHP
这个地方是最重要的,因为默认情况下Nginx和PHP之间是一点感觉没有的。
在之前搭建过Apache+PHP,Apache+PHP编译后生成的是模块文件,而Nginx+PHP需要PHP生成可执行文件才可以,所以要利用fastcgi技术来实现Nginx与PHP的整合,这个只要我们安装时启用 FastCGI即可。
此次我们安装PHP不仅使用了FastCGI,而且还使用了PHP-FPM,PHP-FPM说白了是一个管理 FastCGI的一个管理器,它作为PHP的插件存在,在安装PHP时要想使用PHP-FPM就需要把PHP-FPM以补丁的形式安装到PHP中,而且 PHP要与PHP-FPM版本一致,这是必须的,切记!
# tar zxvf php-5.2.10.tar.gz
# gzip -cd php-5.2.10-fpm-0.5.11.diff.gz | patch -d php-5.2.10 -p1
# 将php-5.2.10-fpm-0.5.11.diff.gz以补丁形式加到php-5.2.10里面
# cd php-5.2.10/
# ./configure --prefix=/usr/local/php --with-fpm-user=www --with-fpm-group=www --with-config-file-path=/usr/local/php/etc --enable-maintainer-zts --enable-fastcgi --enable-fpm --with-gd --enable-gd-native-ttf --with-curl --with-xsl --with-gettext --with-freetype-dir --with-iconv-dir --with-jpeg-dir --with-png-dir --with-libdir=lib64 --with-libxml-dir --with-curlwrappers --with-xmlrpc --enable-mbstring --with-mcrypt --with-openssl --with-mhash --with-mysqli --with-pdo-mysql --with-pdo-sqlite --with-pcre-regex --with-pear --with-zlib --enable-safe-mode --enable-bcmath --enable-libxml --enable-mbregex --enable-mbstring --enable-soap --enable-pcntl --enable-shmop --enable-sockets --enable-sysvsem --enable-xml --enable-zip --enable-inline-optimization --enable-opcache
参考命令
# ./configure --prefix=/usr/local/php --enable-maintainer-zts --enable-fastcgi --enable-fpm --with-zlib --with-gd --enable-gd-native-ttf --with-curl --with-curlwrappers --enable-mbstring --with-mcrypt --with-openssl --with-mhash
--with-libxml-dir=/usr
--enable-xml
--disable-rpath
--enable-discard-path
--enable-safe-mode
--enable-bcmath
--enable-shmop
--enable-sysvsem
--enable-inline-optimization
--enable-mbregex
--enable-force-cgi-redirect
--enable-pcntl
--enable-sockets
--with-ldap
--with-ldap-sasl
--with-xmlrpc
--enable-zip
--enable-soap
--without-pear
--with-freetype-dir
--with-jpeg-dir
--with-png-dir
--with-config-file-path=/usr/local/php/etc
--with-mysql=/usr/local/mysql
--with-mysqli=/usr/local/mysql/bin/mysql_config
--with-iconv-dir=/usr/local
注:
--enable-maintainer-zts 是线程安全(pthreads),php编译时生效,不可动态加入
Nginx+PHP整合,在安装时必须启用 --enable-fastcgi和--enable-fpm,这两个选项是做什么的上面已经描述。执行完后系统会提示-–enable-fastcgi是一个未知选项,我们不必理会,原因见php文档:
Fastcgi is the preferred SAPI to connect PHP and Lighttpd. Fastcgi is automagically enabled in php-cgi in PHP 5.3, but for older versions configure PHP with --enable-fastcgi.
上面文档已经说明,PHP 5.3 以上版本已默认自动启用了 php-cgi ,因此不必再添加 --enable-fastcgi
#注:make的时候一定要加上后面的参数,才能成功。否则会提示错误:
/home/data/tool-server/php-5.5.21/ext/iconv/iconv.c:2486: undefined reference to `libiconv_close'
ext/iconv/.libs/iconv.o: In function `php_iconv_stream_filter_append_bucket':
/home/data/tool-server/php-5.5.21/ext/iconv/iconv.c:2637: undefined reference to `libiconv'
/home/data/tool-server/php-5.5.21/ext/iconv/iconv.c:2636: undefined reference to `libiconv'
/home/data/tool-server/php-5.5.21/ext/iconv/iconv.c:2558: undefined reference to `libiconv'
ext/iconv/.libs/iconv.o: In function `php_iconv_stream_filter_ctor':
/home/data/tool-server/php-5.5.21/ext/iconv/iconv.c:2512: undefined reference to `libiconv_open'
collect2: ld returned 1 exit status
make: *** [sapi/cli/php] Error 1
继续,make的时候一定要加上后面的参数
# make ZEND_EXTRA_LIBS='-liconv' (注意: 单引号是中文格式,要转成英文单引号)
# make install
# cp php.ini-dist /usr/local/php/etc/php.ini
# cd ../
注:在安装过程中采用了tar包与rpm混合安装的情况,对于库的指定确实出现了很大的麻烦。如果采用rpm安装的话,不需要指定支持包的位置就可以了,tar安装的话,需要指定安装位置。
安装错误1
yum install php-devel
解决方法:
yum --enablerepo=remi, remi-php54 install php-devel
原文引用:
can't install php-devel on centos
Rather than running yum install php-devel you needed to run yum --enablerepo=remi,remi-php54 install php-devel .
In short, just specifying which php-devel version you wanted from the remi repo. In your case you had php54 installed from remi so you needed to add in "remi-php54" . That would have successfully installed php-devel without the downtime.
安装错误2
make: *** [ext/phar/phar.php] Error 127
解决方法:
vim /etc/ld.so.conf
最后面添加一行
/usr/local/lib
执行命令
/sbin/ldconfig
然后,重新编译
make clean && make
七、编译安装PHP5扩展模块
1. 安装memcache (跳过)
# tar zxvf memcache-3.0.8.tgz
# cd memcache-3.0.8/
# /usr/local/php/bin/phpize
# ./configure --with-php-config=/usr/local/php/bin/php-config --enable-memcache --with-zlib-dir
# make
# make install
# 说明:memcache库的位置
Installing shared extensions:
/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/
# cd ..
安装提示出错: make: *** [memcache.lo] Error 1
没有安装zlib : yum -y install zlib-devel
继续安装: ./configure --with-php-config=/usr/local/php/bin/php-config --enable-memcache --with-zlib-dir
make 编译,再次出错:
分析文件名,发现文件名错误 mysql_driver.loT, mysql_statement.loT
修改文件名
ln -s memcache.loT memcache.lo
ln -s memcache_pool.loT memcache_pool.lo
ln -s memcache_ascii_protocol.loT memcache_ascii_protocol.lo
ln -s memcache_binary_protocol.loT memcache_binary_protocol.lo
ln -s memcache_standard_hash.loT memcache_standard_hash.lo
ln -s memcache_consistent_hash.loT memcache_consistent_hash.lo
ln -s memcache_session.loT memcache_session.lo
2. 安装eaccelerator php加速 (跳过)
# tar jxvf eaccelerator-0.9.5.3.tar.bz2
# cd eaccelerator-0.9.5.3/
# /usr/local/php/bin/phpize
# ./configure --enable-eaccelerator=shared --with-php-config=/usr/local/php/bin/php-config
# make
# make install
Installing shared extensions:
/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/
# cd ../
3. 安装PDO_MYSQL (数据库连接的支持)
# tar zxvf PDO_MYSQL-1.0.2.tgz
# cd PDO_MYSQL-1.0.2/
# /usr/local/php/bin/phpize
#./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/bin/mysql_config
或者
#./configure --with-php-config=/usr/local/php/bin/php-config
--with-pdo-mysql=/usr/
# make
# make install
Installing shared extensions:
/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/
# cd ../
补充:
如果 php 是通过CentOS系统命令安装的 yum install php ,则安装方法如下:
# tar zxvf PDO_MYSQL-1.0.2.tgz
# cd PDO_MYSQL-1.0.2/
# /usr/bin/phpize
# ./configure --with-php-config=/usr/bin/php-config
# make
# make install
Installing shared extensions: /usr/lib64/php/modules/
# cd ../
如果出现错误“make: *** [pdo_mysql.lo] Error 1”,这是因为在编译安装时需要 MySQL 的头的文件,而它按默认搜索找不到头文件的位置所以才出现这个问题。通过软连接把MySQL头文件对应到/usr/local/include/下就好,软链接命令:
ln -s /usr/include/mysql/* /usr/local/include/
make 出错信息:
checking for mysql_config... not found
configure: error: Cannot find MySQL header files under
原因也是找不到mysql文件头,解决步骤:
1. 搜索mysql文件头 find / -name 'mysql.h'
2. 若搜索没有,则需安装 yum -y install mysql-devel MariaDB-devel
3. 验证mysql头文件存在
# ll /usr/include/mysql/mysql.h
-rw-r--r-- 1 root root 39069 Jun 23 17:24 /usr/include/mysql/mysql.h
4. 建立软链接
ln -s /usr/include/mysql/* /usr/local/include/
5. 重新编译
/usr/bin/phpize 或 /usr/local/php/bin/phpize (推荐)
./configure --with-php-config=/usr/local/php/bin/php-config
make && make install
编译再出错:
checking for mysql_config... not found
checking for mysql install under /usr/local... libs under /usr/local/lib; seems promising
checking for mysql_query in -lmysqlclient... no
configure: error: mysql_query missing!?
原因是找不到 /usr/bin/mysql_config
1. 搜索 mysql_config : find / -name mysql_config
2. 重新make编译:
./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/bin/mysql_config
3. make 编译,再次出错:
分析文件名,发现文件名错误 mysql_driver.loT, mysql_statement.loT
修改文件名(每次报错后,需多次编译 make 才会生成 xxx.loT)
ln -s pdo_mysql.loT pdo_mysql.lo
ln -s mysql_driver.loT mysql_driver.lo
ln -s mysql_statement.loT mysql_statement.lo
然后: make && make install
安装成功后,查看:
# ll /usr/local/php/lib/php/extensions/no-debug-non-zts-20151012/
-rwxr-xr-x 1 root root 50910 8月 5 16:43 ctype.so
-rwxr-xr-x 1 root root 307912 8月 5 16:05 curl.so
-rwxr-xr-x 1 root root 3613807 8月 5 16:44 fileinfo.so
-rwxr-xr-x 1 root root 1208680 8月 5 16:10 gd.so
-rwxr-xr-x 1 root root 52941 8月 5 16:11 gettext.so
-rwxr-xr-x 1 root root 171817 8月 5 16:44 iconv.so
-rwxr-xr-x 1 root root 3070736 8月 5 16:08 mbstring.so
-rwxr-xr-x 1 root root 1950316 8月 5 16:12 opcache.a
-rwxr-xr-x 1 root root 910196 8月 5 16:12 opcache.so
-rwxr-xr-x 1 root root 3908168 8月 5 22:38 pdo_mysql.so
-rwxr-xr-x 1 root root 97437 8月 5 16:45 posix.so
-rwxr-xr-x 1 root root 366873 8月 5 16:46 sockets.so
-rwxr-xr-x 1 root root 850224 8月 5 16:44 zip.so
附上CentOS7 MySQL目录:
# find / -name "mysql"
/etc/logrotate.d/mysql
/etc/rc.d/init.d/mysql
/home/data/tool-server/php-7.0.9/travis/ext/mysql
/usr/bin/mysql
/usr/include/mysql
/usr/lib64/mysql
/usr/share/mysql
/var/lib/mysql
/var/lib/mysql/mysql
/run/lock/subsys/mysql
# find / -name "*mysql_config*"
/usr/bin/mysql_config
/usr/share/man/man1/mysql_config.1.gz
4. 安装ImageMagick,它是Linux下非常强大的图象处理函数与GD类似.
# tar zxvf ImageMagick-7.0.8-8.tar.gz
# cd ImageMagick-7.0.8-8/
# /usr/local/php/bin/phpize
#./configure
# make
# make install
# cd ../
5. 安装imagick (连接PHP和ImageMagick的通道)
# tar zxvf imagick-3.4.3.tgz
# cd imagick-3.4.3/
# /usr/local/php/bin/phpize
# ./configure --with-php-config=/usr/local/php/bin/php-config
# make
# make install
Installing shared extensions:
/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/
# cd ../
补充:
如果 php 是通过CentOS系统命令安装的 yum install php ,则安装方法如下:
# tar zxvf imagick-3.4.3.tgz
# cd imagick-3.4.3/
# /usr/bin/phpize
# ./configure --with-php-config=/usr/bin/php-config
# make
# make install
Installing shared extensions: /usr/lib64/php/modules/
Installing header files: /usr/include/php/
# cd ../
6. 修改php.ini文件,已使php支持扩展的功能
cp /home/data/tool-server/LNMP/php-7.0.13/php.ini-development /usr/local/php/etc/php.ini
vim /usr/local/php/etc/php.ini
查找
extension_dir = "./"
修改为
extension_dir="/usr/local/php/lib/php/extensions/no-debug-non-zts-20131226/"
并在此行后增加以下几行,然后保存:
extension = "memcache.so"
extension = "pdo_mysql.so"
extension = "imagick.so"
再查找output_buffering = Off
修改为output_buffering = On
7. 配置eAccelerator加速PHP
mkdir -p /usr/local/eaccelerator_cache
vim /usr/local/php/etc/php.ini
到配置文件的最末尾,粘上以下内容:
[eaccelerator]
zend_extension="/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="64"
eaccelerator.cache_dir="/usr/local/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="3600"
eaccelerator.shm_prune_period="3600"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
八、PHP-fpm配置
1. 创建php-fpm配置文件
php-fpm是为PHP打的一个FastCGI管理补丁,可以平滑变更php.ini配置而无需重启php-cgi:
在/usr/local/php/etc/目录中创建php-fpm.conf文件,
也可以在原有的基础上进行修改,即先复制默认配置文件为:
cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf (推荐)
如果您安装 Nginx + PHP 用于程序调试
请将以下的
<value name="display_errors">0</value>改为
<value name="display_errors">1</value>,以便显示PHP错误信息,否则,Nginx 会报状态为500的空白错误页。
说明:创建www用户与组,这里创建了下面就不用创建了。
#/usr/sbin/groupadd www -g 48
#/usr/sbin/useradd -u 48 -g www www
rm -f /usr/local/php/etc/php-fpm.conf
vim /usr/local/php/etc/php-fpm.conf
;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix (/usr/local/php). This prefix can be dynamically changed by using the ; '-p' argument from the command line. ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Note: the default prefix is /usr/local/php/var ; Default Value: none ;pid = run/php-fpm.pid xxxxxx ....... xxxxxxx ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; Multiple pools of child processes may be started with different listening ; ports and different management options. The name of the pool will be ; used in logs and stats. There is no limitation on the number of pools which ; FPM can handle. Your system will tell you anyway :) ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. ; Relative path can also be used. They will be prefixed by: ; - the global prefix if it's been set (-p argument) ; - /usr/local/php otherwise include=/usr/local/php/etc/php-fpm.d/*.conf
其中,
vim /usr/local/php/etc/php-fpm.d/www.conf
; Start a new pool named 'www'. ; the variable $pool can be used in any directive and will be replaced by the ; pool name ('www' here) [www] ; Per pool prefix ; It only applies on the following directives: ; - 'access.log' ; - 'slowlog' ; - 'listen' (unixsocket) ; - 'chroot' ; - 'chdir' ; - 'php_values' ; - 'php_admin_values' ; When not set, the global prefix (or /usr/local/php) applies instead. ; Note: This directive can also be relative to the global prefix. ; Default Value: none ;prefix = /path/to/pools/$pool ; Unix user/group of processes ; Note: The user is mandatory. If the group is not set, the default user's group ; will be used. user = nobody group = nobody ; The address on which to accept FastCGI requests. ; Valid syntaxes are: ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on ; a specific port; ; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on ; a specific port; ; 'port' - to listen on a TCP socket to all addresses ; (IPv6 and IPv4-mapped) on a specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. listen = 127.0.0.1:9000 xxxxxxxxxxx pm = dynamic ; The number of child processes to be created when pm is set to 'static' and the ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. ; This value sets the limit on the number of simultaneous requests that will be ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP ; CGI. The below defaults are based on a server without much resources. Don't ; forget to tweak pm.* to fit your needs. ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' ; Note: This value is mandatory. pm.max_children = 10 ; The number of child processes created on startup. ; Note: Used only when pm is set to 'dynamic' ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 pm.start_servers = 6 ; The desired minimum number of idle server processes. ; Note: Used only when pm is set to 'dynamic' ; Note: Mandatory when pm is set to 'dynamic' pm.min_spare_servers = 2 ; The desired maximum number of idle server processes. ; Note: Used only when pm is set to 'dynamic' ; Note: Mandatory when pm is set to 'dynamic' pm.max_spare_servers = 10 ; The number of seconds after which an idle process will be killed. ; Note: Used only when pm is set to 'ondemand' ; Default Value: 10s ;pm.process_idle_timeout = 10s; ; The number of requests each child process should execute before respawning. ; This can be useful to work around memory leaks in 3rd party libraries. For ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. ; Default Value: 0 ;pm.max_requests = 500 xxxxxxxxxxx
2. php-fpm启动与管理
/usr/local/php/sbin/php-fpm start
注:/usr/local/php/sbin/php-fpm还有其他参数,包括:
start|stop|quit|restart|reload|logrotate,修改php.ini后不重启php-cgi,重新加载配置文件使用reload,就保持了在php的fastcgi进程持续运行的状态下,又重新加载了php.ini。
php-fpm 启动/关闭/重启脚本,需要自己手写,请参考
九、Nginx安装
1. nginx安装
Nginx只是web服务器,配合php技术实现的fastcgi来提高性能。
1、安装rewrite模块支持包pcre库:
pcre是perl所用到的正则表达式,目的是让所装的软件支持正则表达式。
默认情况下,Nginx只处理静态的网页请求,也就是html.
如果是来自动态的网页请求,比如*.php,那么Nginx就要根据正则表达式查询路径,然后把*.PHP交给PHP去处理。
# tar zxvf pcre2-10.30.tar.gz
# cd pcre2-10.30/
# ./configure
# make && make install
cd ../
2. 安装Nginx
说明:创建www用户组及www用户,如果之前php-fpm没有创建,这里要创建。
# /usr/sbin/groupadd www
# /usr/sbin/useradd -g www www
# tar zxvf nginx-1.12.1.tar.gz
# cd nginx-1.12.1/
#./configure --user=www --group=www --prefix=/usr/local/nginx --with-pcre --with-http_stub_status_module --with-http_sub_module --with-http_ssl_module --with-stream_ssl_module --with-http_v2_module --with-http_realip_module --with-http_flv_module --with-http_mp4_module --with-http_gunzip_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_auth_request_module --with-mail --with-mail_ssl_module --with-threads --with-stream --with-stream_ssl_module
参考:
./configure \ --prefix=/usr/local/nginx \ --sbin-path=/usr/sbin/nginx \ --conf-path=/etc/nginx/nginx.conf \ --error-log-path=/var/log/nginx/error.log \ --http-log-path=/var/log/nginx/access.log \ --pid-path=/var/run/nginx.pid \ --lock-path=/var/run/nginx.lock \ --http-client-body-temp-path=/var/cache/nginx/client_temp \ --http-proxy-temp-path=/var/cache/nginx/proxy_temp \ --http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp \ --http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp \ --http-scgi-temp-path=/var/cache/nginx/scgi_temp \ --user=nobody \ --group=nobody \ --with-pcre \ --with-http_v2_module \ --with-http_ssl_module \ --with-http_realip_module \ --with-http_addition_module \ --with-http_sub_module \ --with-http_dav_module \ --with-http_flv_module \ --with-http_mp4_module \ --with-http_gunzip_module \ --with-http_gzip_static_module \ --with-http_random_index_module \ --with-http_secure_link_module \ --with-http_stub_status_module \ --with-http_auth_request_module \ --with-mail \ --with-mail_ssl_module \ --with-file-aio \ --with-ipv6 \ --with-threads \ --with-stream \ --with-stream_ssl_module
运行结果:
Configuration summary
+ using threads
+ using system PCRE library
+ using system OpenSSL library
+ using system zlib library
nginx path prefix: "/usr/local/nginx"
nginx binary file: "/usr/local/nginx/sbin/nginx"
nginx modules path: "/usr/local/nginx/modules"
nginx configuration prefix: "/usr/local/nginx/conf"
nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
nginx pid file: "/usr/local/nginx/logs/nginx.pid"
nginx error log file: "/usr/local/nginx/logs/error.log"
nginx http access log file: "/usr/local/nginx/logs/access.log"
nginx http client request body temporary files: "client_body_temp"
nginx http proxy temporary files: "proxy_temp"
nginx http fastcgi temporary files: "fastcgi_temp"
nginx http uwsgi temporary files: "uwsgi_temp"
nginx http scgi temporary files: "scgi_temp"
# make && make install
# cd ../
3.Nginx 安装后只有一个程序文件
本身并不提供各种管理程序,它是使用参数和系统信号机制对 Nginx 进程本身进行控制的。
Nginx 的参数包括有如下几个:
-c <path_to_config>:使用指定的配置文件而不是 conf 目录下的 nginx.conf 。
-t:测试配置文件是否正确,在运行时需要重新加载配置的时候,此命令非常重要,用来检测所修改的配置文件是否有语法错误。
-v:显示 nginx 版本号。
-V:显示 nginx 的版本号以及编译环境信息以及编译时的参数。
例如我们要测试某个配置文件是否书写正确,我们可以使用以下命令
sbin/nginx -t -c conf/nginx.conf
/usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
十、nginx配置1.在/usr/local/nginx/conf/目录中创建nginx.conf文件:
rm -f /usr/local/nginx/conf/nginx.conf
vim /usr/local/nginx/conf/nginx.conf
======================================= ## nginx.conf才是nginx web服务器的配置文件 ======================================= user www www; /*启动nginx服务的用户与组*/ worker_processes 5; /*启动nginx服务的工作进程*/ error_log logs/nginx_error.log crit; /*错误日志,以及等级*/ pid /usr/local/nginx/nginx.pid; /*nginx服务进程PID*/ worker_rlimit_nofile 51200; events { use epoll; /*工作模式*/ worker_connections 51200; /*每进程允许最大的同时连接数*/ } http { include mime.types; default_type application/octet-stream; #charset gb2312; server_names_hash_bucket_size 128; client_header_buffer_size 32k; large_client_header_buffers 4 32k; sendfile on; tcp_nopush on; keepalive_timeout 60; tcp_nodelay on; fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; fastcgi_buffer_size 64k; fastcgi_buffers 4 64k; fastcgi_busy_buffers_size 128k; fastcgi_temp_file_write_size 128k; gzip on; gzip_min_length 1k; gzip_buffers 4 16k; gzip_http_version 1.0; gzip_comp_level 2; gzip_types text/plain application/x-javascript text/css application/xml; gzip_vary on; #limit_zone crawler $binary_remote_addr 10m; server { listen 80; /*监听端口*/ server_name localhost; /*服务器名称*/ index index.html index.htm index.php; /*缺省主页名称*/ root /usr/local/nginx/html; /*网站根目录,也可以采用下面内容*/ #也可以采用相对路径,下面注释部分*/ #location / { # root html; # index index.html index.htm; # } #limit_conn crawler 20; #通过FastCGI方式支持PHP,php页面由fastcgi代理处理,这也是反向代理的一个应用,这里可以是jsp/asp等脚本。 #Nginx是通过本机的9000端口将PHP请求转发给PHP的,PHP自己是从本机的9000端口侦听数据,Nginx与PHP通过本机的9000端口完成了数据请求。 location ~ .*\.(php|php5)?$ { #fastcgi_pass unix:/tmp/php-cgi.sock; fastcgi_pass 127.0.0.1:9000; /*fastcgi监听端口*/ fastcgi_index index.php; include fcgi.conf; /*fastcgi配置文件,修改为以下内容*/ } #对于某一类型的文件,设置过期时间,静态的页面通常设置长一点。 #静态文件,nginx自己处理 location ~ .*\.(gif|jpg|jpeg|png|bmp|swf|js|css)$ { expires 30d; } #日志的格式 log_format access '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" $http_x_forwarded_for'; access_log logs/access.log access; } }
说明:以上配置文件只是基本配置文件,要实现其它功能的话,需要在此基础上进行修改。
补充:
如果没有安装 php-fpm,则可以直接运行 php-cgi 来启动解析php,命令如下:
/usr/bin/php-cgi -b 127.0.0.1:9000 &
配置php反向代理:
vim /usr/local/nginx/conf/nginx.conf
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
location ~ \.php$ {
root html;
fastcgi_pass 127.0.0.1:9000; # php-cgi 启动的监控IP:端口
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /usr/local/nginx/html$fastcgi_script_name;
include fastcgi.conf;
}
配置完nginx配置文件 /usr/local/nginx/conf/nginx.conf 后,检测配置是否正确,以及重载或重启:
1) 检测配置是否正确
[root@mimvp-bj html]# /usr/local/nginx/sbin/nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
2) 重载或重启(使用一个即可,推荐重载reload命令)
[root@mimvp-bj html]# /etc/init.d/nginx reload
Reloading nginx: [ OK ]
[root@mimvp-bj html]# /etc/init.d/nginx restart
Stopping nginx: [ OK ]
Starting nginx: [ OK ]
2. 在/usr/local/nginx/conf/目录中创建fcgi.conf文件
说明:可以直接粘贴以下内容。
vim /usr/local/nginx/conf/fcgi.conf
fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200;
十一、nginx启动与管理
1.启动nginx
/usr/local/nginx/sbin/nginx
2.测试nginx配置文件
修改/usr/local/nginx/conf/nginx.conf配置文件后,请执行以下命令检查配置文件是否正确:
# /usr/local/nginx/sbin/nginx -t
如果屏幕显示以下两行信息,说明配置文件正确:
the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
the configuration file /usr/local/nginx/conf/nginx.conf was tested successfully
3.查看Nginx主进程号
ps -ef | grep "nginx: master process" | grep -v "grep" | awk -F ' ' '{print $2}'
屏幕显示的即为Nginx主进程号,例如:
6302
这时,执行以下命令即可使修改过的Nginx配置文件生效:
kill -HUP 6302
或者无需这么麻烦,找到Nginx的Pid文件:
kill -HUP `cat /usr/local/nginx/logs/nginx.pid`
4.配置开机自动启动Nginx + PHP
vi /etc/rc.local
加入以下内容:
ulimit -SHn 51200
/usr/local/php/sbin/php-fpm start
/usr/local/nginx/sbin/nginx
5. 测试nginx
vim /usr/local/nginx/html/phpinfo.php
<?php echo date("Y-m-d H:i:s"); echo "<h1>hello mimvp.com</h1>"; echo phpinfo(); ?>
6. 测试结果
访问nginx服务器地址:http://123.57.78.100
CentOS7 Nginx 网站访问不了
CentOS 7.2 访问不了Nginx网站,大部分是因为CentOS 7 默认开启了防火墙
关闭防火墙:
systemctl stop firewalld.service # 停止firewall
systemctl disable firewalld.service # 禁止firewall开机启动
firewall-cmd --state # 查看默认防火墙状态(关闭后显示not running,开启后显示running)
# firewall-cmd --state
not running
打印PHP系统环境变量:
vim /usr/local/nginx/html/phpinfo.php
<?php echo phpinfo(); ?>
访问nginx服务器地址:http://123.57.78.100/phpinfo.php
参考推荐:
LNMP(linux+nginx+mysql+php)服务器环境配置
Linux php7安装mongoDB和memcached扩展(推荐)
Linux php7.0 安装redis和PHP扩展(推荐)
版权所有: 本文系米扑博客原创、转载、摘录,或修订后发表,最后更新于 2018-12-27 12:39:41
侵权处理: 本个人博客,不盈利,若侵犯了您的作品权,请联系博主删除,莫恶意,索钱财,感谢!